Type FL Beam Flange Clamp
An easy to install beam flange clamp, with moderate loading capacity, for suspending building services from structural or secondary beams.
Overview
Fire tested, FM and VdS approved standard flange clamp for applications with moderate loadings. The Type FL uses a grade 8.8 cup point setscrew for a secure grip on both parallel and tapered flanges. Supplied with the back hole drilled or tapped and a hexagon head metric setscrew. Manufactured from malleable iron with zinc plated finish. Can be used with Type SW (Swivel Unit) when connecting to inclined sections.
NEW: Independently fire tested in accordance with ASTM E-119 for a duration of 120 minutes. For fire-resistance rating load limits please click here to download the flyer.
Features & Benefits
- NEW: Independently fire tested in accordance with ASTM E-119.
- Simple cost effective solution.
- Suitable for parallel and tapered flanges.
Approvals
Click on an approval logo to download the certificate or report.
Properties
- Manufactured from malleable iron to BS EN 1562.
- Supplied with zinc plated finish.
Technical Specification
| Product Code | Safe Working Loads (FOS 4:1) | Tightening Torque | Dimensions | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilled Hole | Tapped Hole | Drilled Hole Ø | Tapped Thread | Tensile | Clamping Range | Setscrew | Setscrew | Locknut | T | U | X | Width V |
| Y | Y | W | Z | Z | N | |||||||
| mm | kN | mm | Nm | Nm | mm | mm | mm | mm | ||||
| LFL037C* | LFL037T | 11 | M10 | 2.4 | 3 - 20 | M10 | 8 | 22 | 45 | 40 | 22 | 22 |
| LFL050C | LFL050T | 13 | M12 | 3.1 | 3 - 24 | M10 | 8 | 22 | 50 | 46 | 28 | 25 |
* Also available in stainless steel.
| Product Code | Safe Working Load (FOS 4:1) | Tightening Torque | Dimensions | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Drilled Hole | Tapped Hole | Ø Drilled Hole | Tapped Thread | Tensile | Clamping Range | Setscrew1) | Setscrew | Locknut | T | U | X | Width V |
| Y | Y | W | Z | Z | N | |||||||
| lbs | ft lb | ft lb | ||||||||||
| LFL037C* | LFL037T | 7⁄16" | 3⁄8" UNC | 540 | 1⁄8" - 25⁄32" | M10 (3⁄8") | 6 | 16 | 13⁄4" | 19⁄16" | 7⁄8" | 7⁄8" |
| LFL050C | LFL050T | 1⁄2" | 1⁄2" UNC | 700 | 1⁄8" - 15⁄16" | M10 (3⁄8") | 6 | 16 | 2" | 113⁄16" | 11⁄8" | 1" |
* Also available in stainless steel.
1) Metric setscrew supplied.
How can we
help you?
Reasons to choose Lindapter
-
Save time and money
Clamping two steel sections together avoids time-consuming welding or conventional drilling and bolting.
-
Safer connections
Drilling and welding in the field is avoided, removing the need for hot work permits and encouraging safer site conditions.
-
High strength
Lindapter clamps are manufactured from high strength materials to resist high load requirements and harsh environments.
-
Industry leading approvals
Lindapter has earned a reputation synonymous with safety and reliability, gaining multiple independent approvals.
-
Adjustable
Quickly align steel sections by sliding the section into the correct position before tightening the Girder Clamp to complete the installation.
-
Free connection detailing
Lindapter’s experienced Engineers can detail a custom connection based on your specific requirements free of charge.
You must have a Lindapter account to access this content
Log in to your account
Register for an account
Don't have an account?
Click here to registerAlready registered?
If you have registered for an account but have not received your confirmation email, please click here to resend.
Headquarters
Lindapter InternationalLindsay House, Brackenbeck Road
Bradford, West Yorkshire
BD7 2NF
United Kingdom Map and directions
news
- Environmental Policy
- T&Cs
- Privacy
- Cookies
- © Lindapter International 2024. All rights reserved.